The slag remover is a new multifunctional slag remover developed by Rongsheng Company on the basis of fully combining the advanced slurry purification technology at home and abroad, making full use of the principles of Fluid mechanics and centrifugal force, which can simultaneously remove light and heavy impurities in the slurry. It is a new high-efficiency and energy-saving slag remover system; It can remove heavy impurities such as sand and iron filings in the slurry and light impurities such as air, plastic sheet, foam, paraffin, adhesive, etc. Especially suitable for large-scale production lines such as cardboard and corrugated paper.

main features

1. The upper part of the slag remover is made of wear-resistant stainless steel material, and the lower part is designed with a unique spiral cone. The material is wear-resistant ceramic or ammonia ester, which prevents particles directly reaching the bottom of the spiral from being siphoned again by the vortex beam in the center of the slag remover, resulting in higher slag removal efficiency.

2. The improved design of the slurry inlet and light impurity separation device can stably receive pressure fluctuations in the slurry flow while reducing the reverse pressure caused by continuous slag discharge. The removal effect of light impurities is more ideal, and the system power consumption is lower.

3. The unique inner wall design makes it easier for the slurry suspension to accumulate, while also allowing the slurry to flow downward in a spiral shape.

It can minimize wear and improve slag removal efficiency.

4. The light slag tube is made of wear-resistant transparent glass, which is convenient for inspection.

6. The outlet fluid of the slurry is basically level with the top of the slag remover, which helps to convert some kinetic energy into pressure.

7. The bottom slag discharge box is made of ceramic material, which has a longer service life.

8. Equipped with advanced RQC type lightweight slag remover for light impurities, the separation is more thorough and the system power is lower.

9. The final section is equipped with a unique fiber recycling device, which has a more obvious slurry saving effect.

10. With slight improvements, heavy impurities can be treated separately and used as a professional heavy slag remover.

The slag remover is a new multifunctional slag remover developed by Rongsheng Company on the basis of fully combining the advanced slurry purification technology at home and abroad, making full use of the principles of Fluid mechanics and centrifugal force, which can simultaneously remove light and heavy impurities in the slurry. It is a new high-efficiency and energy-saving slag remover system; It can remove heavy impurities such as sand and iron filings in the slurry and light impurities such as air, plastic sheet, foam, paraffin, adhesive, etc. Especially suitable for large-scale production lines such as cardboard and corrugated paper.

main features

1. The upper part of the slag remover is made of wear-resistant stainless steel material, and the lower part is designed with a unique spiral cone. The material is wear-resistant ceramic or ammonia ester, which prevents particles directly reaching the bottom of the spiral from being siphoned again by the vortex beam in the center of the slag remover, resulting in higher slag removal efficiency.

2. The improved design of the slurry inlet and light impurity separation device can stably receive pressure fluctuations in the slurry flow while reducing the reverse pressure caused by continuous slag discharge. The removal effect of light impurities is more ideal, and the system power consumption is lower.

3. The unique inner wall design makes it easier for the slurry suspension to accumulate, while also allowing the slurry to flow downward in a spiral shape.

It can minimize wear and improve slag removal efficiency.

4. The light slag tube is made of wear-resistant transparent glass, which is convenient for inspection.

6. The outlet fluid of the slurry is basically level with the top of the slag remover, which helps to convert some kinetic energy into pressure.

7. The bottom slag discharge box is made of ceramic material, which has a longer service life.

8. Equipped with advanced RQC type lightweight slag remover for light impurities, the separation is more thorough and the system power is lower.

9. The final section is equipped with a unique fiber recycling device, which has a more obvious slurry saving effect.

10. With slight improvements, heavy impurities can be treated separately and used as a professional heavy slag remover.