It can be used in various slurry purification systems to remove small heavy impurities such as sand and dust from the slurry. Its unique structural design allows it to simultaneously remove light impurities such as plastic, adhesive, wax, hot melt, and free air from the slurry.

RDC can simultaneously remove light and heavy impurities, making you feel relaxed and comfortable.

Main technical parameters:

Feed concentration: 0.3-1.0%

Single stage heavy impurity volume slag removal rate: 6-10% (relative slurry flow rate)

Single stage light impurity volume slag removal rate: 10-12% (relative slurry flow rate)

Single feed volume: 680-760 L/min Feed pressure: 200-400 Kpa

Main features:

A's unparalleled system flexibility and unique satellite design concept endow other types of slag removal systems with unparalleled flexibility, with a variety of space saving installation methods to choose from.

B double wall structure design RDC adopts a double wall structure design, and the upper and lower inner cones are easy to exchange. The leakage caused by excessive wear of high wear impurities can be detected through the leakage holes of the upper and lower shells. At this time, the leakage holes can be plugged to prevent further leakage. The inner cone can be replaced during maintenance, and the bottom inner cone is made of ceramic material to ensure long-term use.

C High purification efficiency RDC has a newly designed slurry inlet top, a long conical zone, and light and heavy impurity discharge ports. The slurry flow enters the upper cone through the inlet located at the top of the slurry inlet of the slag remover, forming an accelerated flow combined with a longer residence time, giving the slag remover a high separation effect.

Due to its high separation efficiency and slag discharge outlet design, RDC can operate at much lower slag discharge rates than other similar large diameter slag eliminators. The result of low slag discharge is that the subsequent slag remover can be used less or reduced by a certain amount, without losing the efficiency of the entire system.

RDC is a large diameter slag remover with the same purification efficiency as a small diameter slag remover, which has better operating performance, especially with minimal blockage. The specially designed slag discharge box allows the use of larger slag discharge outlets, ensuring the achievement of this balanced operating performance. The large slag discharge outlet also reduces the risk of blockage caused by excessive impurities.

F can be used as a separate heavy slag remover with slight improvements.

It can be used in various slurry purification systems to remove small heavy impurities such as sand and dust from the slurry. Its unique structural design allows it to simultaneously remove light impurities such as plastic, adhesive, wax, hot melt, and free air from the slurry.

RDC can simultaneously remove light and heavy impurities, making you feel relaxed and comfortable.

Main technical parameters:

Feed concentration: 0.3-1.0%

Single stage heavy impurity volume slag removal rate: 6-10% (relative slurry flow rate)

Single stage light impurity volume slag removal rate: 10-12% (relative slurry flow rate)

Single feed volume: 680-760 L/min Feed pressure: 200-400 Kpa

Main features:

A's unparalleled system flexibility and unique satellite design concept endow other types of slag removal systems with unparalleled flexibility, with a variety of space saving installation methods to choose from.

B double wall structure design RDC adopts a double wall structure design, and the upper and lower inner cones are easy to exchange. The leakage caused by excessive wear of high wear impurities can be detected through the leakage holes of the upper and lower shells. At this time, the leakage holes can be plugged to prevent further leakage. The inner cone can be replaced during maintenance, and the bottom inner cone is made of ceramic material to ensure long-term use.

C High purification efficiency RDC has a newly designed slurry inlet top, a long conical zone, and light and heavy impurity discharge ports. The slurry flow enters the upper cone through the inlet located at the top of the slurry inlet of the slag remover, forming an accelerated flow combined with a longer residence time, giving the slag remover a high separation effect.

Due to its high separation efficiency and slag discharge outlet design, RDC can operate at much lower slag discharge rates than other similar large diameter slag eliminators. The result of low slag discharge is that the subsequent slag remover can be used less or reduced by a certain amount, without losing the efficiency of the entire system.

RDC is a large diameter slag remover with the same purification efficiency as a small diameter slag remover, which has better operating performance, especially with minimal blockage. The specially designed slag discharge box allows the use of larger slag discharge outlets, ensuring the achievement of this balanced operating performance. The large slag discharge outlet also reduces the risk of blockage caused by excessive impurities.

F can be used as a separate heavy slag remover with slight improvements.