The RZC-1500 medium and low concentration slag remover is a newly developed slag remover with large diameter, high throughput, and high efficiency and energy conservation, based on absorbing advanced foreign technology. It can be widely used in various slurry purification systems to remove heavy impurities such as sand and iron filings from the slurry. The slurry enters the cone along the spiral tangent direction and quickly forms a stable vortex. The good slurry is separated from the top, and the tail slurry enters the bottom slag discharge tank. The unique balanced water design allows the tail slurry to undergo secondary separation in the secondary separation chamber. The fibers are centrally recovered from the center of the secondary separation chamber, and the tail slurry is discharged from the bottom slag discharge port of the separation chamber, greatly reducing fiber loss.

Main features:

Flexible structural design: Each slag remover is composed of several parts, including the inlet part, wear-resistant cone, tail slag discharge cone, secondary separation chamber, etc., which is easy to disassemble and reduce maintenance costs.

Low power consumption: The unique structural design allows the slurry to enter the slag remover at any concentration of 0.4-2.0%, and the inlet pressure only needs 0.2Mpa to form a stable vortex, greatly reducing system power consumption.

C Service life: The main body of the slag remover is made of wear-resistant stainless steel.

The slag discharge cone is made of ceramic material, ensuring its service life and corrosion resistance.

D secondary fiber separation device: A unique secondary fiber separation device is used to minimize fiber loss. The separation chamber is designed with wear-resistant and transparent materials, making it easy to observe the operation situation.

E flexible usage feature: This slag remover can be used alone or in series with several branches, and can also be placed at the end of other heavy slag removers as a fiber recovery device for independent use.

Main technical parameters:

Excessive flow rate per branch: 1200-1500 L/min

Feed concentration: 0.4-2.0%

Feed pressure: 0.2-0.35 Kpa

Pressure difference: 0.03-0.1Kpa

The RZC-1500 medium and low concentration slag remover is a newly developed slag remover with large diameter, high throughput, and high efficiency and energy conservation, based on absorbing advanced foreign technology. It can be widely used in various slurry purification systems to remove heavy impurities such as sand and iron filings from the slurry. The slurry enters the cone along the spiral tangent direction and quickly forms a stable vortex. The good slurry is separated from the top, and the tail slurry enters the bottom slag discharge tank. The unique balanced water design allows the tail slurry to undergo secondary separation in the secondary separation chamber. The fibers are centrally recovered from the center of the secondary separation chamber, and the tail slurry is discharged from the bottom slag discharge port of the separation chamber, greatly reducing fiber loss.

Main features:

Flexible structural design: Each slag remover is composed of several parts, including the inlet part, wear-resistant cone, tail slag discharge cone, secondary separation chamber, etc., which is easy to disassemble and reduce maintenance costs.

Low power consumption: The unique structural design allows the slurry to enter the slag remover at any concentration of 0.4-2.0%, and the inlet pressure only needs 0.2Mpa to form a stable vortex, greatly reducing system power consumption.

C Service life: The main body of the slag remover is made of wear-resistant stainless steel.

The slag discharge cone is made of ceramic material, ensuring its service life and corrosion resistance.

D secondary fiber separation device: A unique secondary fiber separation device is used to minimize fiber loss. The separation chamber is designed with wear-resistant and transparent materials, making it easy to observe the operation situation.

E flexible usage feature: This slag remover can be used alone or in series with several branches, and can also be placed at the end of other heavy slag removers as a fiber recovery device for independent use.

Main technical parameters:

Excessive flow rate per branch: 1200-1500 L/min

Feed concentration: 0.4-2.0%

Feed pressure: 0.2-0.35 Kpa

Pressure difference: 0.03-0.1Kpa