The RZC-2000 medium and low concentration slag remover is designed entirely based on imported similar products. It is suitable for various types of pulp such as waste pulp, chemical pulp, mechanical pulp, etc. It can effectively remove heavy impurities such as sand particles, nails, glass sheets, dust, fiber bundles, etc. from the pulp at a concentration of 0.4-4.5%. It can be used for rough selection and purification when the pulp concentration is high, or for selection and purification when the pulp concentration is low, It is currently an ideal type of slag removal equipment. The slag removal device has a simple structure, small footprint, large production capacity, convenient operation, no blockage of the slag discharge port, high purification efficiency, and the slurry is only treated by the slag removal device once, without the need for tail slurry treatment equipment. It has small fiber loss, cone wear resistance, long service life, no transmission, and easy operation and maintenance.

Main features:

1. The inlet and outlet of the slag remover are equipped with valves (selected by the purchaser) for easy operation and maintenance during work.

2. The cone material is wear-resistant stainless steel or ceramic, with a long service life.

3. Adopting automatic intermittent slag removal not only ensures the slag removal effect but also reduces fiber loss.

4. The equipment itself does not require power and has low operating costs.

5. High degree of automation, once turned on, no manual intervention is required.

6. Provided in a complete set for easy installation and use by users.

Main technical parameters:

Excessive flow rate of a single branch: 1600-2000L/min Feed pressure: 200-350KPa Feed concentration: 0.4-4.5%

The RZC-2000 medium and low concentration slag remover is designed entirely based on imported similar products. It is suitable for various types of pulp such as waste pulp, chemical pulp, mechanical pulp, etc. It can effectively remove heavy impurities such as sand particles, nails, glass sheets, dust, fiber bundles, etc. from the pulp at a concentration of 0.4-4.5%. It can be used for rough selection and purification when the pulp concentration is high, or for selection and purification when the pulp concentration is low, It is currently an ideal type of slag removal equipment. The slag removal device has a simple structure, small footprint, large production capacity, convenient operation, no blockage of the slag discharge port, high purification efficiency, and the slurry is only treated by the slag removal device once, without the need for tail slurry treatment equipment. It has small fiber loss, cone wear resistance, long service life, no transmission, and easy operation and maintenance.

Main features:

1. The inlet and outlet of the slag remover are equipped with valves (selected by the purchaser) for easy operation and maintenance during work.

2. The cone material is wear-resistant stainless steel or ceramic, with a long service life.

3. Adopting automatic intermittent slag removal not only ensures the slag removal effect but also reduces fiber loss.

4. The equipment itself does not require power and has low operating costs.

5. High degree of automation, once turned on, no manual intervention is required.

6. Provided in a complete set for easy installation and use by users.

Main technical parameters:

Excessive flow rate of a single branch: 1600-2000L/min Feed pressure: 200-350KPa Feed concentration: 0.4-4.5%